Receiver Module With Low Noise Channels For 5G Applications


NXP Semiconductors has launched a receiver module that offers two independent channels that can meet 5G requirements.

BTS7202U Receiver Front-End Module by NXP Semiconductor. | Credit : NXP Semiconductor

Transmission speed is not the only factor that boosts the speed of a network. The processing of the received data as well needs to fulfill its role as a part of the system and provide efficient results.

NXP Semiconductors has launched the BTS7202U front-end receiver module (RX-FEM) that can fulfill the processing speed for a network. The operation range of the device is 3.3 to 4.2 GHz. It consists of  2 independent receiver channels each with a low noise amplifier (LNA).

The gain of the module can be set to two different levels – 36.5 dB (high gain mode) and 19 dB (low gain mode) – with fast switching between the two modes. The front-end module is implemented using the NXP’s silicon germanium (SiGe) process. The process offers improved  linearity and reduced noise figures to support better 5G signal quality.

The module has a noise figure of 0.95dB with each channel having a switch to route the high-power TX signals to termination load. The module is available in an HVQFN40 package that measures 6.00 x 6.00 x 0.85 mm and has ESD protection on all pins. It is ideal for 5G massive MIMO and wireless infrastructure applications.

Features
  • Type : Receiver Module
  • Configuration : LNA, Switch
  • Application : Cellular, Wireless Infrastructure
  • Wireless Standard : 5G
  • Bands : Single Band
  • Frequency : 3300 to 4200 MHz
  • Tx Power : 44.5 dBm
  • Rx Gain : 19 to 36.5 dB
  • Rx Noise Figure : 0.95 dB
  • Package Type : Surface Mount
  • Package : HVQFN40
  • Dimensions : 6 mm x 6 mm x 0.85 mm
  • RoHS : Yes
  • Note : Channels: 2, Impedance: 50 Ohms




We will be happy to hear your thoughts

Leave a reply

amilonlineshopper
Logo
Enable registration in settings - general
Compare items
  • Total (0)
Compare
0
Shopping cart